Glass carving is an artistic technique used for inscription of creative designs as well as symbols. There is a technique known as sand-carving that was developed in the late 19th century and is used for creation of multilevel abrasive etchings on glasses. After etching of the design into the glasses, there is addition of light and shadow details. In considering glass carving Alberta residents should appreciate its uses; creation of gemstone, windows, sculptures and more.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are very many people that appreciate the beauty of carved glass. Such carvings will always be seen in shops that sell gifts, in glasses and also in fancy windows. The fact that there are not so many people that deal with the carvings means that as a business it can be very profitable.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are very many people that appreciate the beauty of carved glass. Such carvings will always be seen in shops that sell gifts, in glasses and also in fancy windows. The fact that there are not so many people that deal with the carvings means that as a business it can be very profitable.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
About the Author:
You can visit the website www.claudegarneaustudio.ca for more helpful information about Procedures Involved In Glass Carving Alberta
Tidak ada komentar:
Posting Komentar